Plastimo 1038C 38mm Recess-Mounted Manual Marine Bilge Pump with Cover RWB8266

Plastimo 1038C 38mm Recess-Mounted Manual Marine Bilge Pump with Cover

Recess-mounted manual bilge pump with 360-degree swivelling ports and integrated cover/handle. UV-resistant non-corrosive composite construction. Diaphragm is quickly removable; a diaphragm leak discharges into the cockpit for visibility. Installation drawing dimensions: front face 207mm x 157mm; pump body diameter 140mm; rear projection 130mm; front offset 33mm; open-handle projection 193mm.

Choosing and using this product

A manual bilge pump provides a way to move water without relying on an electric pump motor. Choose the installation position around the person who will operate it as well as around the hose route. The handle needs a clear working arc and a comfortable operating position, while the pump body and hose connections need adequate room behind the mounting surface. A compact face or body measurement alone does not describe the complete operating clearance.

Before ordering a replacement, compare the hose connections, mounting arrangement and handle style with the existing installation. Use the listed dimensions as a starting point and confirm any cut-out or fixing details against the current installation drawing before drilling. Avoid restrictive hose bends and arrange the suction hose so it can pick up water from the intended location. A discharge route must carry water to the chosen outlet without returning it to the space being pumped.

Published manual-pump output depends on the pumping rate and installation conditions. Actual delivery will vary with the operator, suction lift, discharge height and hose resistance, so do not treat a catalogue capacity as a guaranteed emergency pumping rate. Keep the inlet clear of loose debris and make sure the handle can be reached when needed. After installation, test the pump with water, inspect its connections for leakage and familiarise the regular operator with the handle movement. Periodically inspect the diaphragm or other service components according to the maker's instructions. Manual pumping is one part of a boat's water-management arrangements and does not remove the need to find and address the source of incoming water.

Product details

• Product code: RWB8266.
• Product type: Plastimo 1038C Compact Manual Bilge Pump.
• Inlet/outlet: 38mm (1 1/2 inch).
• Capacity: 1 litre per cycle / 45 L/min.