Skip to main content
RHS Boating & Marine

Vultail 3/4in Male BSP to Twin Barbed Hose Tee, Black Plastic for Marine Use RWB3047

$12.98 each
Brand: Vultail Marine Plumbing & Hose Fittings

+
–
The add to cart button will appear once you select the values above

Vultail 3/4in Male BSP to Twin Barbed Hose Tee, Black Plastic for Marine Use

This Vultail black plastic fitting connects a 3/4 inch male BSP threaded port to two equal 3/4 inch barbed hose ends. The tee configuration creates a branch between a threaded component and two hose connections within a water-plumbing layout. Check the 3/4 inch male BSP connection against the receiving female thread, then check both hose internal diameters against the 3/4 inch barbs. The three connection positions affect the layout around the fitting, so account for every hose route rather than checking only the threaded component. The body material and connection layout make it a size-specific water fitting; they do not establish universal compatibility with every onboard hose, pump or pipe system. Compare the complete connection arrangement before choosing a replacement, especially where more than one nominal size or thread type is present.

Choosing and using this product

Verify the mating threads and the sealing method recommended for the connected components. Start the threads squarely, avoid cross-threading and use an assembly method suitable for plastic fittings rather than relying on excessive force. Use hose with the appropriate internal diameter and condition, seat it correctly on each barb, and choose fastening hardware for the assembled hose outside diameter. Leave access to tighten and inspect the hose connections. Allow room for both hose branches and their fastening points, and support each hose so the tee is not loaded unevenly by the surrounding plumbing. Confirm any required working pressure, temperature limit and fluid suitability with the supplier before using the fitting in a demanding application. After assembly, inspect the connection for leakage using the procedure appropriate to the complete system, and retain access for routine checks.

Product details

  • Brand: Vultail.
  • Material: black plastic.
  • Intended use: water connections.
  • Male BSP thread to two equal barbed hose ends.
  • Male thread: 3/4 inch BSP.
  • Hose ends: two 3/4 inch barbs.
  • Configuration: tee branch.