Tridon 117-125mm Stainless T-Bolt Hose Clamp with 24mm Solid Band for Marine Use RWB5894

Tridon 117-125mm Stainless T-Bolt Hose Clamp with 24mm Solid Band for Marine Use

This Australian-made Tridon T-bolt hose clamp is sized for a clamping diameter from 117mm to 125mm. The TTBS117-125P model is intended for extra-heavy-duty applications where large tightening forces are required. It uses an all-stainless construction with a solid 24mm-wide band, 1mm band thickness and a rolled edge intended to help prevent hose damage. Tightening is provided by a high-tensile 316 grade stainless steel hex-head bolt, sized M8 x 80mm. The specified clamping range refers to the outside diameter around the assembled hose connection, rather than the hose internal diameter. Choosing the correct range matters because this style has a defined adjustment window. Check the actual joint diameter and the space available for the band and bolt before selecting this version for a marine hose installation.

Choosing and using this product

Measure the hose over the fitting at the intended clamp position and confirm that the assembled diameter lies within 117-125mm. Allow room for the 24mm band to sit squarely on the supported hose section, with clearance around the M8 x 80mm bolt for installation and later tightening. Position the clamp according to the hose and fitting instructions, keeping it clear of an unsupported hose end or an unsuitable step in the fitting. The rolled band edge is a construction feature; careful positioning and correct tightening are still required to protect the hose. Use the torque or tightening guidance supplied for the clamp and the connected equipment, as greater tightening force is not automatically better for every hose. Check that the hose material, fitting and complete assembly are suitable for the system pressure, temperature and fluid. After assembly, inspect the joint and test the system as directed by its manufacturer. Include the clamp and hose in regular checks for movement, deterioration and leakage, with access retained to service the connection.

Product details

• Model: TTBS117-125P.
• Clamping range: 117-125mm.
• Solid band: 24mm wide x 1mm thick.
• Band edge: rolled.
• Tightening bolt: M8 x 80mm.
• Bolt material: high-tensile 316 stainless steel.
• Construction: all stainless steel.
• Made in Australia.