Skip to main content
RHS Boating & Marine

304 Stainless Steel Marine Flush Rod Holder, Black Cap and 30 Degree Shaft RWB511

$26.69 each
Brand: RHS Boating & Marine – Boat Parts, Marine Accessories & Boating Supplies

+
–
The add to cart button will appear once you select the values above

304 Stainless Steel Marine Flush Rod Holder, Black Cap and 30 Degree Shaft

The RWB511 combines a stamped, polished 304-grade stainless-steel rod holder with a hinged black PVC plug-type sealing cap. The flush-mounted head is spot-welded to the shaft, and a rubber mounting gasket and stainless-steel gimbal pin are included. Its 30-degree shaft and 38mm inside diameter should be checked against the planned fishing position and the rod butt before installation.

Choosing and using this product

Before cutting the gunwale or deck, check the full space below the proposed position. An angled shaft needs clearance along its complete length, not just immediately beneath the head. Check for wiring, hoses, flotation material and structural members, and confirm that the rod can be removed without striking a canopy or rail. Trial-position the actual holder and rod to establish a useful direction.

Use the published head and cut-out measurements to assess the available area, then confirm the final hole shape and fastening pattern against the fitting itself. An existing hole that is close in size is not automatically a suitable replacement location. Select fasteners, backing and any bedding method appropriate to the boat material, taking care not to distort the head when tightening.

Check the rod butt diameter and its gimbal arrangement before use. The shaft bore, opening in the boat and head footprint are different measurements and should not be interchanged. Make sure the handle can seat correctly and be lifted out without catching. Rinse away salt and bait residue after use, inspect the shaft and attachment points regularly, and keep protective liners or caps clean and free of damage.

Product details

  • Product code: RWB511.
  • Material: stamped and polished 304-grade stainless steel.
  • Head: 120 × 95mm; length: 210mm.
  • Shaft inside diameter: 38mm; cut-out hole: 50mm.
  • Shaft angle: 30 degrees.
  • Fastening holes: three 8mm countersunk holes.
  • Hinged black PVC sealing cap, rubber gasket and stainless gimbal pin.
  • Supplied individually.