Bluefin Piranha P6 Nitro Marine Underwater LED Light Cobalt Blue Alloy 24V RWB6319

Bluefin Piranha P6 Nitro Marine Underwater LED Light Cobalt Blue Alloy 24V

The Bluefin Piranha P6 Nitro brings cobalt blue underwater illumination to a boat in a compact, surface-mounted fitting. This 24V version has a alloy base, so the exact variant matters when matching the light to both the electrical system and the hull. The low-profile housing is intended for transom or side mounting, with the light unit sealed behind a high-impact optical polymer lens. An integral driver keeps the lighting assembly together rather than requiring a separate driver box for this single-colour model. The marine-grade aluminium base is the relevant version to consider for an aluminium hull. The fitting is designed for above- or below-waterline mounting; installation position should be chosen around the complete boat layout rather than appearance alone.

Choosing and using this product

Plan the position from inside and outside the hull before drilling. Check that the cable entry will be accessible, that the mounting surface can support the fitting and that the light will not interfere with other hull equipment. Use the supplied template and installation manual for hole locations, sealing and electrical connections. Leave a serviceable cable route and protect the circuit with the supplied fuse arrangement, following the instructions rather than guessing a fuse size. When fitting several lights, assess the combined electrical demand and position them consistently for the intended illumination. Choose the light colour deliberately when matching an existing installation, because a different colour is a separate product variant. The quoted fixture output and maximum lamp output describe different measurements; compare fixture lumens when comparing complete fittings. Check operation and sealing as part of the completed installation, and keep the lens clear during normal boat maintenance.

Product details

• Model and code: Bluefin Piranha P6 Nitro, RWB6319; Cobalt Blue light.
• Base: marine-grade aluminium; supply: 24V.
• Output: 3,200 fixture lumens; maximum 4,500 lamp lumens.
• Dimensions: 110 mm wide × 18 mm deep; 13 mm cable-entry hole.
• Cable: 1.8 m; lens: 3 mm optical-grade polymer; beam: 60 degrees.
• Electrical demand: 1.8 A at 24V; maximum 40 W.
• Catalogue application guide: boats up to approximately 14 m; above- or below-waterline mounting.
• Protection: under/over-voltage, reverse polarity, thermal and hydro-block.
• Supplied with stainless steel fastening screws, waterproof fuse holder, fuse, template and installation manual.
• Two-year limited warranty, subject to following all installation instructions.
• Typical LED life expectancy: 50,000 hours.