#   TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit   RWB542C

     [Previous](#)[Previous](#) [![RWB542C](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB542C.jpg "TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB542C.jpg "TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit")

 [Next](#)[Next](#)

   [![RWB542C](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB542C.jpg "TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB542C.jpg "TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit")[![tmc-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/tmc-1500x1500.jpg "TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit")](https://www.rhsboating.com.au/images/com_hikashop/upload/tmc-1500x1500.jpg "TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit")

    $27.71  each

            Brand: [TMC Marine Pumps, Toilets & Accessories](https://www.rhsboating.com.au/brands-listing/tmc-marine-pumps-toilets-accessories.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### TMC Marine Bilge Blower Mounting Accessory - 75mm Collar and Flange Kit

The TMC 75mm collar and flange kit brings together the two plastic mounting components for the standard TMC bilge blower. It is useful when a refit calls for both parts rather than a flange alone.

Plastic mounting accessory for the TMC standard bilge blower.

### Choosing and using this product

The kit contains a plastic mounting collar and a plastic flange. Treat these as mounting components when planning the job, and compare their role with the parts already fitted to the blower. Choosing the combined kit can make sense when both pieces are missing, damaged or required for the chosen mounting arrangement.

The stated hose size is 75mm. Measure the hose used in your installation and identify the blower before treating the accessory as a match. Hose diameter is an important selection detail, but the mounting arrangement also needs to correspond with the standard TMC blower for which this accessory is listed.

For a refit, photograph the existing assembly before taking it apart and note how the hose approaches the mounting point. This can help you decide which components need attention and retain a useful reference during reassembly. Inspect the surrounding mounting surface and the hose condition while access is available.

As practical fitting guidance, plan enough clearance to attach the hose without forcing it against nearby equipment. Support the duct route and check that the installed mounting components do not leave the hose under avoidable strain. Keep the connection accessible so it can be inspected as part of routine ventilation checks.

Use the blower’s installation instructions to confirm the final mounting method and required fastening arrangement. The purpose of this accessory is to support the specified blower installation; selecting the blower itself still involves checking airflow, voltage and operating requirements for the boat. Review the complete job before ordering to avoid overlooking another component that needs replacement.

### Product details

- Includes plastic mounting collar and flange
- Suits 75mm blower hose