TMC Bilge Blower - 12v - 3”
Move air through a matching bilge ventilation duct with this 12 V TMC blower. Product 220350 uses a 3 inch intake hose connection.
The housing and impeller are ABS. Match the duct diameter, electrical supply and available installation space before selecting the blower.
Select the electrical version and hose diameter first, then confirm the required ventilation performance for the complete installation.
Choosing and using this product
For a service part, identify the existing pump model before ordering. A motor cartridge, switch, strainer or valve renews only its stated part of the assembly. Check adjacent hoses and connections at the same time so an unrelated problem is not mistaken for a failed replacement component.
Allow practical access for inspection and servicing when deciding where the equipment will sit. Check the electrical and plumbing connections against the product instructions, and verify the finished system under its intended operating conditions. Keep the model reference accessible for later maintenance.
A flow figure alone does not describe the complete installation. Hose routing, outlet height and the rest of the plumbing can affect the delivered result. Use the relevant pump guidance when sizing the system rather than treating a catalogue flow figure as a guaranteed output at every outlet.
Select the pump or service component for the actual job: bilge drainage, fresh water, washdown, livewell circulation and waste handling place different demands on a system. Match the stated application first, then compare the power supply, connections and operating details for this exact version.
Compare the package contents with the complete installation you are planning. Pump-only listings and kits can differ in switches, fittings and hoses. Listing the required components before ordering helps you select the appropriate package and avoids treating an illustrated accessory as an included part.
Product details
- Voltage: 12 V
- Intake hose: 3 inch
- Housing and impeller: ABS
- Current draw: 3 A
- Motor: non-arcing
- Product code: 220350