Super SARCA Galvanised Anchor - No. 1 (4kg)
Bring a purpose-designed Australian anchor into your boat’s anchoring setup. The Super SARCA combines a hot-dip galvanised mild-steel body with a distinctive rear hoop and tangle-resistant layout. It is designed for mud, sand, gravel and rock, making it a useful choice when your boating takes you across different bottom types. Its lead-free construction is another clearly defined feature of the design.
The hoop helps the anchor roll into a position where the toe can engage the bottom. A 360-degree pivoting action allows the anchor to respond as the direction of pull changes, while the automatic-reset trip-release arrangement is intended to assist recovery when snagged. These are design features, not a promise that an anchor will hold or release in every seabed or weather condition.
Use the boat-length range as a starting point, then consider your vessel’s displacement, windage and operating conditions. Overall width, height and length matter when checking bow storage and handling space. The three additional lettered dimensions help distinguish the exact geometry of this size, so selecting by anchor weight alone can miss important fit differences.
The stated stainless-steel shackle size and minimum leader-chain guidance relate to this particular model. Check the complete anchor, shackle and chain arrangement before choosing the rest of the rode; those selection figures do not mean a chain or shackle is included. The anchor’s own kilogram figure is its specified size and is separate from any chain weight. This combination of detailed sizing and a recoverable hoop design makes it easier to plan a well-matched anchoring system.
Product details
- Product code: 103122
- Anchor Size: No. 1 (4kg)
- Boat Length (m): 3.8 - 4.5m
- Width (mm): 345
- Height (mm): 250
- Length (mm): 605
- A (mm): 145
- B (mm): 165
- C (mm): 375
- S/S Shackle Size: 6mm
- Minimum leader-chain guide: 4m of 8mm