S/S Hose Clamp No.16 (22-38mm)
Secure a suitably sized hose connection with this Waterline No. 16 hose clamp. Its 22–38 mm adjustment range is the key measurement to compare with the hose over its fitting.
The heavy-duty clamp uses all-stainless-steel construction and is supplied in clamshell packaging. This code has a pack quantity of 1.
Choose the 22–38 mm range by the outside diameter of the assembled hose connection, rather than using the hose’s nominal inside diameter alone. Confirm that the clamp is appropriate for the particular hose and connection being assembled.
Choosing and using this product
Check the stated contents when putting together the plumbing run. A fitting-only listing does not necessarily include hose, clamps, seals or a mounting assembly. Lay out the required connections before installation so the finished arrangement can be checked as a whole.
Where stainless steel is specified, match the stated grade and the adjoining materials when planning the installation. The grade identifies the material selection; it does not by itself establish a load capacity or make every fastening arrangement suitable. Check the complete assembly and its intended application together.
Keep service points accessible and follow the relevant system instructions for fastening, sealing and hose support. Avoid forcing a hose or thread to compensate for an unsuitable fitting. Confirm the finished connection and normal system operation before putting the installation back into use.
When comparing alternatives, use the specified material and intended application rather than assuming every marine fitting is suitable for every liquid. Keep the part reference with the plumbing records so future spares can be matched to the connection actually installed.
For a replacement, inspect the existing fitting and adjoining hose before ordering. Consider the direction of the connection as well as its size. An elbow, straight fitting or barbed tail changes the route and clearance needed even when the nominal connection size is similar.
Product details
- Clamp number: 16
- Adjustment range: 22–38 mm
- Material: all stainless steel
- Pack quantity: 1
- Packaging: clamshell
- Product code: 350858