SEAFLO Comfort Marine Toilet - 24v
Plan a practical onboard bathroom around the Comfort Seaflo electric marine toilet. Product 385362 is the 24 V version, so match its operating format and connections to the boat’s installation.
A self-priming pump and backflow prevention form part of the design. The toilet can be installed above or below the waterline when the complete plumbing arrangement follows the manufacturer’s installation requirements. The presence of a backflow preventer does not remove the need to assess the installation as a whole.
Push-button flushing is controlled by the supplied switch panel with fuse. A fully enclosed permanent-magnet motor has a stainless steel shaft, and the self-priming macerator flush arrangement is designed for marine use.
The ceramic bowl has smooth, crevice-free contours for cleaning. A soft-close seat and left- or right-handed installation options help you compare the toilet with the available bathroom layout.
The flexible-impeller flush pump has an open-flow rating of 18.9 L/min. This is the pump flow figure rather than a water-per-flush quantity. Match the 3/4-inch inlet and 1-inch outlet to the intended plumbing.
Select the toilet by the actual layout and connections, allowing room to reach hoses and service components after installation. The model designation alone is not a substitute for checking dimensions and the position of the plumbing.
The Comfort body measures 335.8 mm wide, 492 mm deep and 380.7 mm high. Use all three dimensions to assess the space, including the hose connections and access beside the bowl. The choice between 12 V and 24 V is separate from the body size.
Product details
- Voltage: 24v
- Amp: 10A
- Connections: 3/4” Inlet - 1” Outlet
- Flush pump open flow: 18.9 L/min
- Bowl: ceramic
- Seat: soft close
- Installation: left or right handed
- Included: push-button flush panel with fuse
- Width: 335.8 mm
- Depth: 492 mm
- Height: 380.7 mm
- Product code: 385362