SEAFLO Accumulator & Pump System - 12v
Choose SEAFLO Accumulator & Pump System - 12v for a water system that matches its 12 V supply and specified connections. Compare the pressure, current or fuse requirement and available mounting space when selecting the pump.
This assembled pressure set combines a five-chamber diaphragm pump, strainer and pre-pressurised 8 L accumulator tank. Quick-connect electrical connections and a rubber-mounted board bring the main components together for installation.
The pressure-on setting is 40 psi and the pressure-off setting is 60 psi. Check both limits when matching the assembled set to the connected water system, rather than selecting on open-flow output alone.
Read the voltage, flow and pressure figures together. The electrical rating identifies the correct version, while the connection sizes identify the plumbing interfaces; neither can be selected from the model name alone.
Check the full installation space, including room for fittings and hose bends. Leave service access around the pump and strainer rather than measuring only the bare pump housing. Follow the pump instructions for mounting, electrical protection and commissioning.
Choosing and using this product
Compare the package contents with the complete installation you are planning. Pump-only listings and kits can differ in switches, fittings and hoses. Listing the required components before ordering helps you select the appropriate package and avoids treating an illustrated accessory as an included part.
Select the pump or service component for the actual job: bilge drainage, fresh water, washdown, livewell circulation and waste handling place different demands on a system. Match the stated application first, then compare the power supply, connections and operating details for this exact version.
For a service part, identify the existing pump model before ordering. A motor cartridge, switch, strainer or valve renews only its stated part of the assembly. Check adjacent hoses and connections at the same time so an unrelated problem is not mistaken for a failed replacement component.
Product details
- Voltage: 12v
- Open flow: 19Lpm
- Pressure On: 40psi - 2.8bar
- Pressure Off: 60psi - 4.2Bar
- Max Draw: 17.0A
- Connection: 1/2” Barb
- Tank volume: 8 L
- Product code: 187696