#   Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618   RWB3618

     [Previous](#)[Previous](#) [![RWB3618](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB3618.jpg "Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB3618.jpg "Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618")

 [Next](#)[Next](#)

   [![RWB3618](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB3618.jpg "Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB3618.jpg "Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618")[![rule-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/rule-1500x1500.jpg "Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618")](https://www.rhsboating.com.au/images/com_hikashop/upload/rule-1500x1500.jpg "Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618")

    $51.13  each

            Brand: [Rule Bilge Pumps, Float Switches & Parts](https://www.rhsboating.com.au/brands-listing/rule-bilge-pumps-float-switches-parts.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### Rule Marine Bait Pump Mounting Bracket and Water Scoop Assembly RWB3618

This bracket and water-scoop assembly is designed to mount a compatible Rule pump in a bait-water installation. The stainless steel bracket, scoop and U-bolt form an accessory assembly rather than a complete pump. The stated compatibility includes specific small Rule models, so check the pump code and housing arrangement before ordering.

### Choosing and using this product

The revised scoop uses a spigot that fits into the pump housing after the strainer base is removed. This makes correct component matching especially important. Do not assume that a different pump with the same hose size or output will connect to the assembly in the same way. Compare the existing equipment with the manufacturer’s fitting information before changing the installation.

Plan the mounting location and hose route as part of the complete bait-tank system. Water pickup, pump operation and the tank’s overflow arrangement all need to work together. Allow access for inspection and cleaning, and make sure hoses and wiring are supported without pulling on the pump. Have a marine installer assess any arrangement involving hull or transom penetrations.

Check the assembly for secure attachment after fitting and test the system under the conditions intended for its use. A pickup arrangement should not be assumed to provide the required flow at every boat speed or trim angle. Monitor the tank during initial operation and verify that water can drain or overflow appropriately.

Routine cleaning helps keep the pickup route clear of weed and other debris. Inspect the bracket, U-bolt, pump attachment and hose connections periodically, particularly after a trip in shallow or weedy water. This listing supplies the bracket, scoop and U-bolt assembly described below; the compatible pump must be selected separately.

### Product details

- Stainless steel bracket, scoop and U-bolt assembly.
- Fits old and new Rule 360/500 GPH pumps, including RWB800 and RWB801.
- Remove pump strainer base for fitting.
- Revised scoop has a spigot fitting into pump housing.
- Product code: RWB3618.