#   Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM   RWB655

     [Previous](#)[Previous](#) [![RWB655](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB655.jpg "Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB655.jpg "Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM")

 [Next](#)[Next](#)

   [![RWB655](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB655.jpg "Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB655.jpg "Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM")[![rule-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/rule-1500x1500.jpg "Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM")](https://www.rhsboating.com.au/images/com_hikashop/upload/rule-1500x1500.jpg "Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM")

    $95.01  each

            Brand: [Rule Bilge Pumps, Float Switches & Parts](https://www.rhsboating.com.au/brands-listing/rule-bilge-pumps-float-switches-parts.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### Rule In-Line Marine Bilge Blower - 100mm, 24V, 235 CFM

The Rule 100mm in-line bilge blower provides 235 CFM airflow for a 24V system. Its straight-through layout offers a useful option when the ventilation hose route and mounting surface favour an in-line installation.

Ignition-protected in-line blower for bilges, engine compartments, galleys and heads. Five-blade fan with nose cone, integral mounting bracket, hose flange stops and front/rear shaft seals for moisture protection. In-line airflow cools the motor.

### Choosing and using this product

The five-blade fan and nose cone form the airflow assembly, while the in-line air movement also cools the motor. Front and rear shaft seals provide moisture protection, and the integral bracket gives you a defined mounting point. Hose flange stops help identify the connection positions when laying out the ducting.

Choose RWB655 by matching all three main requirements: 24V electrical supply, 100mm hose and the airflow needed for the intended space. For a replacement, compare the overall dimensions including the bracket with the room available around the existing unit. Leave additional working space for connecting the hose and inspecting the wiring.

For a new installation, plan where fresh air will enter as well as where extracted air will leave. Consider the complete duct route through the bilge, engine compartment, galley or head. As practical installation guidance, support the hose and avoid crushing it behind equipment or forcing it around unnecessarily tight bends.

The ignition-protected construction is a stated product feature; suitability for the particular boat and ventilation arrangement should still be checked against the installation instructions. Review the listed current when arranging the electrical circuit, with cable size and protection selected for the actual installation. Keep the blower and duct connections accessible for periodic checks, and follow the boat builder’s ventilation procedure before engine operation.

### Product details

- Voltage: 24V
- Current: 2.4A
- Hose: 100mm (4 inch)
- Airflow: 235 CFM (6.7 cubic metres/minute)
- Size including bracket: 130 L x 150 W x 120mm H