Polypropylene Male BSP to Barbed Hose Tail - 1/2” BSP - 3/4” (20mm)
Build the specified water connection with this black polypropylene male bsp to barbed hose tail. Product 185955 uses 1/2” BSP and a 3/4” (20mm) barbed hose tail.
The straight format connects the male threaded port end to the specified hose size without adding an elbow to the route.
Match thread gender and standard before ordering. This fitting is intended for water connections; no fuel, pressure or temperature approval is inferred from its material alone.
Choosing and using this product
For this version, configuration: Male BSP to Barbed Hose Tail. Use that specific detail when comparing the item with your existing equipment or planned installation. Other sizes and configurations in the range should be checked separately rather than treated as equivalent.
For this version, thread: 1/2” BSP. Use that specific detail when comparing the item with your existing equipment or planned installation. Other sizes and configurations in the range should be checked separately rather than treated as equivalent.
Check the stated contents when putting together the plumbing run. A fitting-only listing does not necessarily include hose, clamps, seals or a mounting assembly. Lay out the required connections before installation so the finished arrangement can be checked as a whole.
For this version, material: black polypropylene. Use that specific detail when comparing the item with your existing equipment or planned installation. Other sizes and configurations in the range should be checked separately rather than treated as equivalent.
Plan the connection from the system outward: identify the fluid application, mating thread or hose size, and the space available for the fitting. A nominal pipe-thread size is a separate measurement from a hose diameter, so compare the correct dimension at each connection.
Product details
- Thread: 1/2” BSP
- Hose Tail: 3/4” (20mm)
- Material: black polypropylene
- Configuration: Male BSP to Barbed Hose Tail
- Product code: 185955