Multiflex C4 OMC Control Cable - 15ft (approximately 4.57m)
Choose this Multiflex C4 control cable for the specified pre-1979 Johnson/Evinrude application. The engine generation is a key distinction from the later C14 family.
This version is specified as 15ft (approximately 4.57m). Use these exact details when comparing the available options for your installation.
Confirm the motor year and both end connections, then choose the length that suits the routed installation. Similar cable lengths do not make different control-cable families interchangeable.
The nominal 15-foot length corresponds to 4.572 metres. Measure the full routed path and identify the connection type before selecting this length; extra cable length does not compensate for an incompatible end fitting.
Choosing and using this product
Keep connections and moving areas accessible for inspection. After fitting, the complete steering or control arrangement needs to be checked in accordance with its instructions, including movement through its intended range. A new replacement part does not remove the need to inspect adjoining worn components.
Check the supplied contents carefully when planning the job. A cable, helm, wheel, bracket and complete kit each cover a different part of the installation. List any associated components needed for the existing system so the required parts can be checked together before work starts.
For a cable purchase, measure the intended route using the relevant system instructions and account for the specified end connections. For a mounting or service part, compare the actual component and its location. Space around the helm, engine and transom can affect the suitability of the finished assembly.
Record the selected part code alongside the boat’s helm and cable references. That makes a later replacement easier to identify and helps distinguish the fitted system from similar-looking alternatives. Where the existing arrangement cannot be positively identified, establish that information before committing to a different part.
Product details
- Standard-duty control cable for Johnson / Evinrude motors manufactured before 1979.
- Cable length 15ft (approximately 4.57m).