#   Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V   RWB2077

     [Previous](#)[Previous](#) [![RWB2077](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB2077.jpg "Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB2077.jpg "Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V")

 [Next](#)[Next](#)

   [![RWB2077](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB2077.jpg "Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB2077.jpg "Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V")[![aaa-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/aaa-1500x1500.jpg "Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V")](https://www.rhsboating.com.au/images/com_hikashop/upload/aaa-1500x1500.jpg "Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V")

    $37.96  each

            Brand: [AAA Marine Inspection Ports & Boat Accessories](https://www.rhsboating.com.au/brands-listing/category/aaa-marine-inspection-ports-boat-accessories.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### Heavy Duty Marine Battery Isolator - Standard, 180A Continuous at 12V

RWB2077 is a heavy-duty isolator for 12V or 24V systems. Its specified ratings of 180A continuous and 800A intermittent apply at 12V.

Heavy-duty isolator with rubber sealing cap and brass bolts and nuts.

### Choosing and using this product

A dedicated isolator provides a clear switching point for the battery circuit included in its installation. Consider it when replacing an existing switch or arranging an accessible isolation control during an electrical refit. The correct choice depends on both the physical installation and the electrical duty of the circuit being switched.

Check the system voltage and compare the relevant current ratings with the expected load. Pay attention to the difference between continuous operation and short-duration demand when assessing suitability. Measure the available mounting space and allow room for the body, cable connections and operation of the control. Select cable sizes and terminations as part of the complete circuit design, with appropriate protection elsewhere in the system.

Plan the switch position so it can be reached without moving stored gear or straining around the battery. Label what it controls and keep that information with the wiring diagram. Identify equipment that needs an ongoing supply before deciding which circuits will be isolated, so the final arrangement matches the boat's operating requirements.

Follow the engine, charging-system and battery manufacturer's guidance when operating the switch, particularly if charging equipment is running. Isolate supplies using the appropriate procedure before installation or servicing, and support heavy cables independently of the switch terminals. During maintenance, inspect the mounting, cable ends and connections for looseness or damage. Check that the operating control remains accessible after other equipment is added nearby. A clearly documented arrangement helps another operator understand the shutdown procedure and makes it easier to trace the switched circuit during later service work or fault-finding aboard.

For a 24V installation, establish the applicable current capacity before selecting this switch for the planned duty.

### Product details

- Plastic body
- Rating at 12V: 180A continuous, 800A intermittent
- Bolts: 10mm
- Voltage: 12V or 24V