Double Braid Boat Anchor Rope with Snap Hook – 8mm x 20m – Boating Rope & Lines 563950
Double Braid Anchor Rope with Snap Hook - 8mm x 20m
This 8 mm double-braid anchor rope is supplied in a 20 m length with a stainless-steel thimble at one end, together with galvanised D shackles and a stainless-steel snap hook. The flexible, low-stretch rope is resistant to UV, oil, petrol, rot and mildew.
The fitted hardware provides a useful starting point for an anchoring connection. Check the complete end arrangement against your anchor and attachment points, and match the available line length to the intended location. The rope breaking strain is not a working load rating for the assembled fittings.
Choosing and using this product
Plan where the line will run and where it may contact an edge or fitting. Keep the route and end connections accessible for inspection, and follow the product’s care guidance. After use, organise the line so it can be taken out without tangling with neighbouring equipment.
When ordering several lengths, label them by diameter, construction and purpose. Colour can help distinguish stored lines, but the actual specification remains the reliable reference. Retain the product code when a later extension or replacement needs to match the original supply.
Measure the complete requirement before comparing coils or reels. Check whether the listing supplies a cut length, a full roll or a finished line with an end fitting. The end treatment can be an important difference when replacing an existing line.
Choose the line by construction, diameter and supplied length together. Those details influence handling and how it fits the intended fittings or storage space. A rope selected for anchoring may have different requirements from a line used for a cover, general lashing or another specified task.
Use the stated material and any supplied load information for the intended application. A breaking-strain figure is not the same as a working-load limit for the finished arrangement. Knots, terminations, wear and the surrounding equipment need to be considered when selecting the complete system.
Product details
- Product code: 563950
- Rope diameter: 8mm
- Rope Length: 20m
- Breaking strain: 1325kg
