Cast Stainless Steel Deck Filler – 38mm – PETROL – Boat Plumbing 356100
Cast S/S Deck Filler - 38mm - PETROL
Finish the tank filling connection with this 38 mm PETROL cast stainless steel deck filler. Match the hose connection and cap format to the installation when selecting the filler.
The safety chain retains the cap at the filler, keeping the two components connected during access to the filling point. An O-ring seal and opening key are included.
The word PETROL is cast into the top in large print, identifying this specific filler version at the filling point.
Product 356100 suits 38 mm hose. Check that diameter against the actual fill hose and confirm the mounting arrangement before ordering.
Choosing and using this product
When comparing alternatives, use the specified material and intended application rather than assuming every marine fitting is suitable for every liquid. Keep the part reference with the plumbing records so future spares can be matched to the connection actually installed.
Plan the connection from the system outward: identify the fluid application, mating thread or hose size, and the space available for the fitting. A nominal pipe-thread size is a separate measurement from a hose diameter, so compare the correct dimension at each connection.
For a replacement, inspect the existing fitting and adjoining hose before ordering. Consider the direction of the connection as well as its size. An elbow, straight fitting or barbed tail changes the route and clearance needed even when the nominal connection size is similar.
Keep service points accessible and follow the relevant system instructions for fastening, sealing and hose support. Avoid forcing a hose or thread to compensate for an unsuitable fitting. Confirm the finished connection and normal system operation before putting the installation back into use.
Where stainless steel is specified, match the stated grade and the adjoining materials when planning the installation. The grade identifies the material selection; it does not by itself establish a load capacity or make every fastening arrangement suitable. Check the complete assembly and its intended application together.
Product details
- Hose size: 38 mm
- Material: cast stainless steel
- Included: safety chain
- Included: O-ring seal and opening key
- Cast marking: PETROL
- Product code: 356100
