#   Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder   SP0878

     [Previous](#)[Previous](#) [![SP0878](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/SP0878.jpg "Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder")](https://www.rhsboating.com.au/images/com_hikashop/upload/SP0878.jpg "Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder")

 [Next](#)[Next](#)

   [![SP0878](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/SP0878.jpg "Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder")](https://www.rhsboating.com.au/images/com_hikashop/upload/SP0878.jpg "Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder")[![berocket-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/berocket-1500x1500.jpg "Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder")](https://www.rhsboating.com.au/images/com_hikashop/upload/berocket-1500x1500.jpg "Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder")

    $30.48  each

            Brand: [Beerocket Combination Boat Rod & Cup Holders](https://www.rhsboating.com.au/brands-listing/category/beerocket-combination-boat-rod-cup-holders.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### Beerocket Oval Stainless Steel Cover Plate for ABS Marine Rod Cup Holder

The Beerocket SP0878 is a stainless-steel top cover plate for the matching oval-top ABS plastic combination rod and cup holder. It provides a metal finish around the top of the existing plastic fitting without replacing the complete holder. This accessory is a practical choice when coordinating the appearance of a fishing area with nearby stainless-steel deck fittings.

### Choosing and using this product

Confirm that the holder is the oval ABS Beerocket version before ordering. The round and oval plates are separate parts and should be selected by the actual top shape. Compare the opening, rim and fastening locations with the existing fitting before installation. A similar-looking cup holder from another range should not be assumed compatible.

Inspect the plastic holder before fitting the cover. If its flange is cracked, distorted or insecure, address that condition first; a decorative plate is not a structural repair. Clean away salt, grit and old residue from the seating surface so the cover can sit evenly. Trial-position the plate and confirm that the cup opening and rod access remain unobstructed.

Follow the fitting method supplied with the actual accessory. Check whether the existing fastening arrangement is suitable and avoid forcing misaligned holes or over-tightening against the plastic. If other accessories are already fitted, verify that their seating and clearance are still correct once the cover is added. The cover plate does not alter the shaft angle or bore of the holder underneath.

After fitting, check for sharp or raised edges and confirm that the cover does not move during normal use. Rinse salt deposits from the stainless surface and clean drink spills promptly. Inspect underneath the edge periodically where practical, as trapped grit can mark either surface. Keep the holder drain clear and continue checking the plastic body and mounting points as part of routine boat maintenance.

### Product details

- Product code: SP0878.
- Shape: oval.
- Stainless-steel cover plate for the matching ABS plastic holder.
- Top cover only; complete rod/cup holder is separate.
- The catalogue lists RWB8409 as the corresponding oval ABS holder model.