#   Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing   RWB1610

     [Previous](#)[Previous](#) [![RWB1610](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB1610.jpg "Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB1610.jpg "Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing")

 [Next](#)[Next](#)

   [![RWB1610](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/RWB1610.jpg "Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing")](https://www.rhsboating.com.au/images/com_hikashop/upload/RWB1610.jpg "Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing")[![tridon-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/tridon-1500x1500.jpg "Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing")](https://www.rhsboating.com.au/images/com_hikashop/upload/tridon-1500x1500.jpg "Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing")

    $3.63  each

            Brand: [Tridon Marine Hose Clamps & Accessories](https://www.rhsboating.com.au/brands-listing/tridon-marine-hose-clamps-accessories.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### Tridon 46-70mm Stainless Worm Drive Hose Clamp 12mm Band for Marine Plumbing

This Australian-made Tridon standard worm-drive hose clamp is supplied individually and has a 46-70mm clamping range. The HAS036P model uses a stainless steel perforated band measuring 12mm wide. The perforated band works with the worm-drive mechanism to adjust the clamp around the hose connection. The range identifies the outside diameter that the clamp fits around, so it should be checked against the hose after the hose has been placed over its fitting. The band width also needs to suit the available clamping area on that fitting. This listing is for one clamp; the ten-clamp box quantity is a packing quantity and should not be read as the quantity supplied by an individual item.

### Choosing and using this product

Measure the outside diameter of the assembled hose joint and compare it with the 46-70mm adjustment range. Do not select the clamp from hose internal diameter alone, because hose wall thickness and the fitting underneath affect the actual clamping diameter. Position the 12mm band squarely over a suitable supported section of hose, following the hose and fitting instructions for its location. Check that the screw housing and free band end have clearance around nearby hose, wiring and equipment, and orient the drive so it can be reached during maintenance. Tighten according to the requirements of the hose, clamp and connected equipment; excessive force can damage a hose or distort a connection. Confirm that the materials and complete joint are suitable for the intended fluid, temperature and service conditions. Where more than one clamp is required by the installation instructions, select the quantity and spacing accordingly. Inspect the finished joint for correct seating and test for leakage using the procedure appropriate to the system. Retain access to check the clamp and hose periodically for loosening, damage or deterioration.

### Product details

- Model: HAS036P.
- Clamping range: 46-70mm.
- Band: stainless steel, perforated.
- Band width: 12mm.
- Drive type: worm drive.
- Made in Australia.
- Sale quantity: one clamp.
- Box packing quantity: ten clamps.