#   Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders   SP0879

     [Previous](#)[Previous](#) [![SP0879](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/SP0879.jpg "Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders")](https://www.rhsboating.com.au/images/com_hikashop/upload/SP0879.jpg "Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders")

 [Next](#)[Next](#)

   [![SP0879](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/SP0879.jpg "Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders")](https://www.rhsboating.com.au/images/com_hikashop/upload/SP0879.jpg "Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders")[![berocket-1500x1500](https://www.rhsboating.com.au/images/com_hikashop/upload/thumbnails/300x300/berocket-1500x1500.jpg "Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders")](https://www.rhsboating.com.au/images/com_hikashop/upload/berocket-1500x1500.jpg "Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders")

    $31.13  each

            Brand: [Beerocket Combination Boat Rod & Cup Holders](https://www.rhsboating.com.au/brands-listing/category/beerocket-combination-boat-rod-cup-holders.html)

 [+](#)

 [–](#)

 The add to cart button will appear once you select the values above

    ### Beerocket 95mm Threaded ABS Backing Plate for Marine Plastic Rod Cup Holders

The Beerocket SP0879 is a threaded ABS plastic backing plate listed with the plastic combination rod and cup holder range. Its published diameter is 95mm. This is the separate backing component for a compatible installation, rather than a complete holder or a stainless-steel top trim plate. It is useful to identify by part number when replacing an existing backing component or checking the mounting parts needed for a new holder.

### Choosing and using this product

Confirm compatibility with the actual holder and its mounting arrangement before ordering. The 95mm measurement is the plate diameter, not a stated thread diameter, cut-out size or permitted deck thickness. The catalogue does not publish the thread specification, so do not assume that another similarly sized holder or threaded fitting will engage correctly.

Inspect the existing installation from beneath the mounting surface where possible. Check the space around the holder, access for fitting the backing component and clearance from wiring, hoses and structural members. A component may fit around the holder yet still be difficult to install if access behind the panel is restricted. Compare the old part with the replacement before dismantling the installation.

Clean the mating surfaces and inspect the holder threads for damage or debris. Start any threaded engagement carefully by hand and do not force a part that feels crossed or binds. Follow the installation guidance for the actual holder and plate, including the permitted mounting-surface arrangement. Avoid using excessive force to compensate for poor fit or a distorted panel.

Once assembled, check that the holder sits securely and that its drain path remains clear. Reinspect after initial use and during routine maintenance for loosening, cracks or movement. Rinse salt and spills from accessible areas and keep the backing component free of trapped debris. If the surrounding boat structure or holder body is damaged, repair that issue rather than relying on a replacement backing plate alone.

### Product details

- Product code: SP0879.
- Threaded backing plate.
- Material: ABS plastic.
- Published diameter: 95mm.
- Listed with the Beerocket plastic rod and cup holder range.
- Backing plate only; holder and top cover are separate products.